Installation of the LIFT-MTB motor
As the saying goes:
“If you give a man a fish he will eat one day, if you teach him to fish he will eat forever”
In this respect, we believe that our users should be able to install the electric DIY bike motor kit on their bikes independently.
Even if it may seem new, and you only have a basic knowledge of mechanics, the assembly of the electric motor kit for bike is very simple, and you will learn easily.
The instructions for the LIFT MTB electric bike kit, which you can download below, will allow you to be 100% autonomous on the assembly and disassembly, rather than being dependent on a third party or a store that will charge for this service.
If you need information, after the purchase we are at your disposal to guide you in the assembly either by e-mail or by phone.
Average installation time for the LIFT-MTB electric bike kit:
Once experienced, 10 minutes will be enough to transform your bike into an electric bike.
- Time of the first assembly for an experienced user between 45min to 1h30
- Time of the first assembly for an average user between 1h30 to 2h
- Time of the first assembly for novice user between 2 and 2h30
Video assembly of a LIFT-MTB electric mid drive kit.
Tools required for assembly :
- a set of BTR keys.
- 8 and 10mm flat keys
Depending on the case, an extractor to remove the cranks or the bottom bracket.
If you have any doubt, please contact us, we can provide the tools if needed.
Electric motor for bike position under frame
Internal electric mid drive motor position
Convert your bike into an electric bike.
Installation videos of the electric DIY motor kit for bike.
Maintenance video of the motor gear part.
Video on BSA frame, with sealed BB that allows to fix the Bikes electric motor on a frame without iscg fixings.
Video installation of the BB30 / PF30 frame adapter
Below is a video installation of the LIFT MTB electric bike kit, with press fit adapter type BB92.
Below is a quick installation video of the electric bike kit, for a kit already adjusted for alignment and frame already with ISCG studs.
Below is a video installation of the type A adaptor, which allows to fix the electric motor on a frame without fasteners.
