Electric mid drive motor is it waterproof ?

Electric bicycle motor is it waterproof ?

Our electric kit is well sealed in the same way as all other motors on the market that is Bosch, Yamaha, Bafang or brose …

We therefore apply the same cleaning and maintenance instructions as all the other players in the market.

We guarantee the LIFT MTB electric motorization system against water splashes.

We have sealed the controller, which is a sensitive electronic part, with a special marine resin.

The motor and the connectors are also waterproof according to IP4 international protection class.

The LIFT MTB system is obviously waterproof for off-road use, just avoid abuse or overexposure to water!

The motor should not be completely immersed in water.
If there is a lot of mud, clean the motor with a rag or brush to remove the bulk of it.
If you have to hose down your bike, don’t insist on cleaning the engine and connections.
For Karcher washing. Insulate the motor part, the accelerator and the connectors with a plastic bag.
The Battery is not waterproof, it is a sensitive point to not expose it to water or store it in humidity.
If you have a battery attached to the frame, remove it to wash the bike.
After washing, dry all the parts that may have been in contact with water or humidity, especially the battery connections, and then, as on a bicycle, grease the chain.

Video of electric MTB in the snow with the LIFT-MTB electric adaptable motorization.