Below, you will find the list of adapters to mount
the LIFT MTB crank motor on most bikes on the market.
If you have any doubts about the compatibility of the different parts:
You can click on the links below:
-Case A- 7075 CNC alu adapter / made in France for threaded frame for a screwed bottom bracket type BSA / fixing between frame and bottom
Reversible to move the motor closer or further if necessary.
-Case B- Adapter for PF30 frame / cup pressed into the frame, inner diameter of the frame 46mm
Available in a competitor pack which contains: type A adapter + PF30 adapter + BSA bottom bracket with 24mm bearing
Or: PF30 / 46MM adapter only
-Cas C- Adaptateur pour cadre BB30/cuvette pressée dans le cadre, diamètre intérieur du cadre 42mm
Contiens l'adaptateur type A + l'adaptateur bb30 + le boitier de pédalier BSA avec roulement 24mm
-Case C- Adapter for BB30 frame / cup pressed into the frame, internal diameter of the frame 42mm
Contains adapter type A + adapter bb30 + BSA bottom bracket with 24mm bearing
-Case D- Adapter for BB92 frame / cup pressed into the frame, internal diameter of the frame 41mm
bottom bracket complete with bearings
available in SRAM 22 / 24mm, Shimano 24mm or, 30mm
To be compatible with your kit, you must make sure that you have 4 fixing holes on the engine support (some kits do not have it.)
Type A adapter mounting, for BSA bottom with thread.
Adapter mounting type A, for BSA housing with integrated cartridge bearing thread
Type D adapter mounting, for press-fit bottom type BB92.
Type A adapter mounting, for BB30- PF30 bottom bracket.
LIFT MTB adapter, 7075 aluminum machining, CNC made in France.