This adapter is only necessary if your frame does not have ISCG mounting studs for motor integration.

Description:

-Case D-

Adapter to fix the motor on a BB92 frame / pressed cups internal diameter of the frame 41mm (see dimensions on the photo).

The bottom bracket is complete with bearings

available for Shimano 24mm and 22/24 sram with adaptater.

Caution:

To be compatible with your electrification kit, you have to make sure that you have 4 fixing holes on the motor support (some old kits don’t have it.)

For more information about our different adapters click on the link below:

Article / Motor mounting adapters.

99,00€

MADE IN FRANCE – 100% French manufacturing

SECURE PAYMENT

CB, bank transfer or check

2 YEARS WARRANTY

By our after-sales service

DELIVERY – Delivery in relay point or at home in most of the countries of the World.

Motor mounting adapter to bb92 standard (for 41mm frame inner diameter) allowing to mount a LIFT MTB mid drive motor on a BB92 frame without ISCG05 mounting studs.

Made of aluminium 7075 t6, CNC machined in France, with tightening by 3 screws BTR m4, this adapter is equipped with ring bearing of diameter 24mm.

It will be compatible with the LIFT MTB crankset and the grey aluminum reducer washer, sold with the LIFT MTB mid drive motor kit.

But also compatible with shimano BB92 crankset, race face bb92 (steel axle)

You can check the video attached.