Tools for electric bike motor kit


Electric mountain bike tool

 

 

 

 

These are some of the essential tools that you may already have in your toolbox, which will allow you to assemble or disassemble certain parts of the LIFT-MTB electric bicycle motor.


CLASSIC LIFT-MTB freewheel tool.

  • Tool allowing to assemble / disassemble the freewheel of your crankset of the "Classic" version of the LIFT-MTB motor kit.
  • The freewheel is tightened on the crankset, with pedaling it generally tightens, it will sometimes be necessary to use an impact wrench to remove this electric mountain bike freewheel.
  • To loosen it is a classic thread so we loosen in the opposite direction of the hands of a watch.

15,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

SHIMANO "Hollowtech II" arm tool.

  • Tool for fitting / removing the screw of Shimano "Hollowtech II" type arms.
  • It fits into the 8 internal grooves of the tightening screw.

5,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

BSA sealed bottom bracket tool.

  • Tool for removing BSA type certified bottom brackets.
  • Compatible with square or isis axles.
  • For the left side bowl, we loosen counterclockwise, and for the right side bowl we loosen clockwise.

10,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

Crank extractor tool

  • Tool to remove the arm for the "Classic" version of the LIFT-MTB crankset
  • It clamps inside the crank, then the center stud presses on the crank axle spindle in order to extract the arm.

12,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

SHIMANO type key for BSA type bottom

  • Shimano-type tool for mounting / dismounting external BSA-type bottom brackets.
  • For the left side bowl, we loosen counterclockwise, and for the right side bowl we loosen clockwise.

20,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

Extrator pressed bottom

  • Tool for removing press-type bottom brackets

29,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

Complete bolt.

  • Bolt set M4 / M5 / M6.
  • Motor replacement bolt.

5,00 €

  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

Chain whip

 

Allows the pinions to be held in place when removing the clamping nut from the cassettes.

Also allows to remove a freewheel.

 

7, 8, 9, 10 speed compatible.

13,00 €

  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

Cassette dismantler

 

Shimano® HG, Mavic®, Sram cassette changer.

 

  • Precision machining on numerically controlled lathe
  • High quality heat treated steel

9,00 €

  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1

Retractable sheath

  • 10 centimeters of retractable sheath.
  • Choice of diameter before retraction (3/6/12/18/25/33 mm).

2,00 €

  • 0,2 kg
  • disponible / available / a disposizione
  • livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1




e-bike kit made in france