Electric parts/ electronic mountain bike
Electric and electronic parts for LIFT-MTB adaptable bike motor kit.
The electronic system is very simple, it is made up of only 3 easily replaceable elements:
- The trigger
- The motor (winding)
- The controller.
Throttle lever with LIFT-MTB connection.
- Allows you to adjust acceleration and power according to your needs.
- Adapted and efficient for off-road use with obstacles to overcome.
- 2 existing models, before January 2021, with a 9-pin connection pin, and after January 2021, without connection pin (the connection will have to be done either)
35,00 €
- 0,2 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Trigger extension
- Allows you to control power with the right or left index finger
- Compatible with all trigger versions
5,00 €
- 0,2 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
x1 Pair of Anderson connectors
- Sold in pairs (so a black connector and a red connector + 2 lugs)
- Connectivity type "Anderson".
- With x1 retractable sleeve.
5,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
x1 Paire of anti-spark connector
- When you connect the battery to the motor, your throttle must be in the OFF position (red button out), because if it is ON (red button pushed), sending the battery power instantly can create an overvoltage. in the controller which could damage it in the long term, the spark-proof connectors prevent such mishandling.
- Sold in pairs (so a male and female connector)
- Type of connection "xt90s".
- With x1 retractable sleeve.
12,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Full controller (controller + harness + trigger)
- Compatible with all V1 / V2 / V3 / V4 engines.
- Complete harness with trigger pre-equipped for mounting the pedal sensor.
- With retractable mounting sleeve
- You just have to connect it to the motor cable to install it.
110,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Controller only
- LIFT-MTB single controller.
- Compatible with versions V1 / V2 / V3 / V4.
- Retractable sheath and serflex supplied.
- To replace the controller alone, cut the heat-shrinkable sheath, disconnect the plugs from the old controller then reconnect the plugs of the new one, replace the heat-shrinkable sheath then heat it.
50,00 €
- 1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Engine harness with trigger
- Engine harness with trigger.
- Compatible with V3/ V4 versions after January 2021.
- Retractable sheath and serflex supplied with.
60,00 €
- 1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Motor link cable with connectors
- Cable dimension: 1,30 m.
- Easy connection with Anderson plugs
20,00 €
- 0,2 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Fireproof bag for batteries
- Different sizes of bags depending on your battery.
- Fireproof bag
25,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
LIFT-MTB loader
LIFT-MTB charger only, compatible with our batteries.
(the charger is delivered with our batteries if you buy a battery)
- Charging current 2 amps.
- Allows for a 30 minute charge time per A/h.
30,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Crank sensor support
- Allows to fix the crank sensor to the frame exists in diameter 35mm (BSA) 41 / 42mm (bb92 / bb30) and 46mm (pf30)
8,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
PAS parts
- Potentiometer bracket allows for fix potentiometre to the head tube
- Button only, color black
- Potentiometre only
- Magnetic crown (choice of diameter 22/24/29 / 30mm)
- captor only (please specifi if it's for bb99 / bsa / pf30 or bb30)
5,00 €
- 0,1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Single motor winding LIFT-MTB
Motor winding only
Generally a very robust part, it is extremely rare to have to replace it.
A winding in bad condition is very dark in colour, even black if it has been overloaded.
150,00 €
- 1 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1
Heat shrik tube
- 10 centimeters of heat shrik tube
- Choice of diameter before retraction (3/6/12/18/25/33 mm).
2,00 €
- 0,2 kg
- disponible / available / a disposizione
- livraison 1 à 3 jours / 1 to 3 days for delivery / retraso de 2 a 3 días / consegna da 1 a 3 giorni1